MARINE OILS

MARINEÖL SYNTHETIC MARINE CYLINDER OIL

Petrovöll MARINEÖL Synthetic Marine Oil is produced using HC synthetic base oils. Its exceptionally high level of performance is achieved through the interaction of these base oils with specially developed, advanced additives. It is characterised by very good corrosion protection for all engine parts and reliably prevents salt deposits. It provides improved durability in the face of typical problems associated with modern inboard and outboard engines such as fuel dilution and water entry, and thus guarantees good wear protection and safe operation.

PERFORMANCE LEVEL

MAN Diesel & Turbo, Winterthur gas & diesel, Wärtsilä, DDC 93k214, JASO MA (T903:2011), NMMA FC-W/FC-W

BENEFITS & ADVANTAGES

Provides superior fluid film protection against metal-to-metal contact
Ensures high shear stability and retains film strength at high loads and high temperatures
Reduces scuffing, pitting and rolling contact fatigue
Protects against wear and corrosion
Provides a high level of oxidation protection
Improves resistance to fuel entry and water contamination

Packs: 1L, 4L, 5L, 20L and 208L Drum

TESTS	RESULTS
Viscosity Grade	SAE 15W40
TBN, mg KOH/g	15	20	40	50
Color	L 3.0	L 3.5	L 4.0	L 5.0
Kin. Viscosity @ 40°C, cSt	93.00	97.89	104.3	108.1
Kin. Viscosity @ 100°C, cSt	14.10	14.26	14.86	15.16
Viscosity Index	156	150	148	147
Density @ 15°C, g/cm³	0.870	0.882	0.887	0.890
Foam Sequence I, II, III, ml/ml	0/0	0/0	0/0	0/0
Flash Point COC, °C	222	222	220	220
Pour Point,°C	-36	-33	-30	-30

MARINEÖL MINERAL MARINE OIL

Petrovöll MARINEÖL Mineral Marine Oil is a marine cylinder lubricant for use in all types of low speed cross head diesel engines burning residual fuels with sulfur contents of up to 2.36% weight. It is ideally suited for the new generation of highly rated, fuel-efficient slow-speed marine diesel engines operating with high pressure, high temperatures and longer strokes. Its high TBN ensures that the large amount of strong acid formed during combustion is dissipated efficiently.

PERFORMANCE LEVEL

MAN diesel & turbo, Winterthur gas & diesel, Wärtsilä, Mitsubishi

BENEFITS & ADVANTAGES

Offers exceptional detergency and anti-wear properties
Controls soot, sludge and piston deposits
Extends drain capability & high temperature properties
Highly rated for medium speed diesel engines used in marine and stationary power generation applications, bearings and stern-tubes & reduction gear lubrication

Packs: 1L, 4L, 5L, 20L and 208L Drum

TESTS	RESULTS
Viscosity Grade	SAE 40				SAE 50
TBN, mg KOH/g	55	70	85	100	55	70	85	100
Color	L 4.0	L 4.5	L 5.0	L 5.5	L 4.5	L 4.5	L 5.0	L 5.5
Kin. Viscosity @ 40°C, cSt	144.6	144.8	143.6	143.1	208.3	201.3	201.8	202.3
Kin. Viscosity @ 100°C, cSt	14.56	14.67	14.81	14.97	18.65	18.79	18.98	19.16
Viscosity Index	99	100	103	105	99	104	106	107
Density @ 15°C, g/cm³	0.916	0.918	0.919	0.923	0.915	0.920	0.922	0.925
Foam Sequence I, II, III, ml/ml	0/0	0/0	0/0	0/0	0/0	0/0	0/0	0/0
Flash Point COC, °C	240	242	246	248	242	248	244	246
Pour Point,°C	-18	-18	-15	-15	-15	-15	-12	-9

MARINEÖL TRUNK PISTON MARINE OIL

Petrovöll MARINEÖL Mineral Marine Piston Oil OILS is a range of trunk piston engine oils that combine an exclusive formulation of the latest additive technologies with the finest quality highly refined base oils. This formulation provides a substantial safety margin to cope with higher stress levels of even the latest and future designs of diesel engines. The specialized additives in this product ensure excellent detergency, discrepancy, improved oxidation stability and excellent anti-wear and reparability properties.

PERFORMANCE LEVEL

Recommended for use in WARTSILA 4T, WARTSILA 8L38 engines

BENEFITS & ADVANTAGES

Offers a wide range of applications in boat engines and other diesel and petrol-driven units
Protects against wear & corrosion and provides a high level of oxidation protection
Improves resistance to fuel entry and water contamination
Effectively controls soot, sludge and piston deposits
Extends drain capability & high temperature properties
Ensures rapid lubrication and low cold wear

Packs: 1L, 4L, 5L, 20L and 208L Drum

TESTS	RESULTS
Viscosity Grade	SAE 40					SAE 50
TBN, mg KOH/g	15	20	40	50	55	15	20	40	50	55
Color	L 3.5	L 3.5	L 4.0	L 4.5	L 4.5	L 4.5	L 3.5	L 4.0	L 4.5	L 4.5
Kin. Viscosity @ 40°C, cSt	144.6	144.8	143.6	143.1	150.5	201.3	201.8	202.3	202.3	202.3
Kin. Viscosity @ 100°C, cSt	14.56	14.67	14.81	14.97	15.00	18.79	18.98	19.16	19.16	19.16
Viscosity Index	99	100	103	105	99	104	106	107	107	107
Density @ 15°C, g/cm³	0.916	0.918	0.919	0.923	0.915	0.920	0.922	0.925	0.925	0.925
Foam Sequence I, II, III, ml/ml	0/0	0/0	0/0	0/0	0/0	0/0	0/0	0/0	0/0	0/0
Flash Point COC, °C	240	242	246	248	242	248	250	240	242	244
Pour Point,°C	-18	-18	-15	-15	-15	-15	-12	-9	-9	-9

MARINEÖL 2-STROKE OUTBOARD OIL, WATER COOLED

Petrovöll MARINEÖL 2T Boat Engine Oil is a 2-stroke, high-performance engine oil produced using selected, high quality base oils. It is formulated with a low-ash additive composition that ensures safe operation and leaves almost no residues behind upon combustion. This prevents spark plug fouling and deposits in critical areas such as piston rings and outlet ports, and ensures a long service life of the engine.

MARINEÖL 2T is developed specifically to meet the requirements of the TC-W 3 (Two-Cycle Water-cooled) specifications from NMMA (National Marine Manufacturers Association). Not only does it provide outstanding protection against corrosion and wear, it also ensures excellent cleanliness of all critical engine parts.

PERFORMANCE LEVEL

API TC, NMMA TC-W 3

BENEFITS & ADVANTAGES

Provides outstanding protection against wear and corrosion
Ensures virtually residue-free combustion
Reduces deposits on piston rings, outlet ports and spark plugs
Offers multi-functional application possibilities
Suits both air-cooled and water-cooled 2-stroke engines
Suits both separate and mixed lubrication

Packs: 1L, 4L, 5L, 20L and 208L Drum

TESTS	RESULTS
Density @ 15°C, g/cm³	0.87
Kin. Viscosity @ 40°C, cSt	50.7
Kin. Viscosity @ 100°C, cSt	7.1
Viscosity Index	133
TBN, mg KOH/g	4.2
Color	Blue
Flash Point COC, °C	142
Pour Point,°C	-35

ALL PRODUCTS